• 青島興昌空壓機械有限公司
    QINGDAO XINGCHANG AIR COMPRESSOR CO.,LTD

    青島興昌空壓機械有限公司 

    產品分類

    瀏覽量

    冷凍式干燥機

    編號
    沒有此類產品
    產品描述

    TROPICAL SERIES

    DAT

    熱帶系列

    ATS設計和生產的新型冷凍式干燥

    機,適應東南亞的環境氣候條件,擁有

    卓越的性能和技術表現。

     

    ATS has designed and manufactured a new

    range of refrigerated compressed air dryers

    that provide a combination of technology

    and performance.

    1.功能原理

    從 空 壓 機 出 來 的 高 溫 潮 濕 的 壓 縮 空 氣 首 先 經 過 氣/氣 熱 交 換

    器 預 冷 卻,預 冷 后 的 空 氣,進 入 蒸 發 器, 與 冷 媒 進 行 熱 交 換 ,

    使 壓 縮 空 氣 的 溫 度 降 至 需 求 的 溫 度 值.空 氣 中 的 水 份 在 此 析

    出,通過除水器將壓縮空氣中析出的冷凝水、油和雜質從空

    氣中分離出來,經過自動排水器將其排出機外。

    主要特點:

    -低壓力露點

    -高效鋁制熱交換器

    -容易操作

    -大型組件

    -全系列環保冷媒

     

    控制器

    控制器的友好界面顯示以下內容:

    -露點

    -工作狀態

    -排污顯示

    -報警顯示

    1. The function principle

    The warm compressed air enters the air/air heat exchanger

    and gets pre-cooled by the outgoing cold air. Then, the pre-co-

    oled air passes through the evaporator where it is cooled to

    the required temperature. The condensate, separated from the

    compressed air in the demister, is discharged automatically

    by the condensate drain.The refrigerant and the temperature

    are regulated by a by-pass pressure valve.

    Main features

    – Low pressure drop

    – High technology

    ultra- compact aluminum

    heat exchanger

    – Easy maintenance

    – Oversize components

    Technical details

    REFRIGERATED AIR DRYERS

    冷凍式干燥機

    HIGH TEMPERATURE SERIES

    高溫型

    主要的性能:

    - 優越的電路設計和多功能電子控制器,可以降低能源消耗

    - 獨特的鋁制熱交換器有良好的散熱效果,壓降很小

    - 在 工 況 變 化 時 露 點 可 以 一 直 被 保 持 穩 定 在3℃ , 歸 功 于 先 進的電子控制系統和高效的熱交換器

    - 產品應用范圍較廣,從小的商業應用到大的工業應用

    - DAT干 燥 機 可 以 根 據 客 戶 的 需 求 安 裝 電 子 排 水 器 或 智 能 排 水 器

    - 是市場上唯一一款一個熱敏開關可以應用于所有型號的機器

    圖3

    circuito / circuit

    。

    1. Compressor

    2. Condensator

    3. Fan motor

    4. Air/Air heat exchanger

    5. Evaporator

    6. Condensate discharge valve

    7. Capillary tube

    8. Dryer f ilter

    9. Demister

    10. Ultra compact heat exchanger

    11. By-pass valve

    最大工作條件:

      -環境溫度:50℃

      -進氣溫度:70℃

      

    ATS 致 力 于 為 市 場 打 造 一 款 高 效 , 節 能 , 高 性 比 的 機 器 。

    DAT系 列 帶 著 這 些 使 命 已 經 投 放 市 場.新 型 電 子 控 制 器 , 可 以控 制 和 管 理 機 器 的 主 要 功 能 , 從 非 常 簡 單 的 到 復 雜.例 如 超 高溫和超低溫警報。

     

     

     標準處理流量基于以下條件:

      -環境溫度:35℃

      -進氣壓力:7barg

      -入口溫度:45℃

      -露點:3℃(-22℃大氣壓力露點)

    標準工作條件:

      -環境溫度:35℃

      -進氣壓力:7barg

      -入口水溫:32℃

      -水壓:最低2bar

    新款DPL系列節能高達90%

    在冷干機的生命周期中超過35%的能源消耗是無效的,為降低能源

    消 耗 成 本 , ATS新 推 出 了 變 速 DPL冷 干 機 系 列 ( 變 頻 系 列 ) 。DPL系 列 有 效 的 減 少 生 產 環 節 所 帶 來 的 能 源 污 染 , 減 少 能 源 損 耗 ,保護環境. 

     

    工作原理

    企業用氣多數會有波動,ATS率先開發出來了變頻冷干機,冷干機

    工作完全匹配用氣量需求,確保設備正常運行的同時,減少不必要的能源浪費,無效能源的消耗量減少超90%。 

     

    Control panels

    The control panels are user

    friendly, allowing the monitor of:

    – Dew point

    – Operating modes

    – Drain management

    – Alarm management

     
     

     

    圖1-控制器

    controlli / controllers

     

    1. from DAT2 to DAT100

    2. from DAT100(3)to DAT2000

    3. from DPL720 to DPL6000

     

    1.DAT2---DAT100

    2.DAT100(3)---DAT2000

    3.DPL720---DPL6000

     

    圖2-熱交換器

    scambiatore / exchanger

     

    1. Air/air exchanger

    2. Flow mixing chamber

    3. Evaporator

    4. Demister

    1.氣/氣熱交換器

    2.混合腔

    3.蒸發器

    4.除水器

     

     

    2. 超級組合式熱交換器

    冷凍式干燥機的關鍵部件是熱交換器,ATS獨特的鋁制換熱器

    單元可以實現多項功能。

     

    氣-氣熱交換

    進入干燥機的熱空氣與已經冷卻的空氣在這里進行熱交換,一

    方面對進入干燥機的壓縮空氣進行預冷,節約能源,另一方面

    讓已經干燥的壓縮空氣升溫,以避免管路結露。

     

    混合腔 

    不同于市面上現有的交換器,特制的單元在氣/氣交換器的出口

    有 一 個 混 合 腔.這 段 行 程 非 常 重 要 , 因 為 氣 體 溫 度 在 氣/氣 交 換

    器出口通道中是不均勻的,混合腔使氣體在均勻的溫度下低速

    進入蒸發器通道,以獲得最佳的熱交換效果。

     

    蒸發器

    經過氣/氣熱交換器預冷的壓縮空氣通過混合腔后進入蒸發器,

    與冷媒進行熱交換,使空氣被干燥至一定的壓力露點下,熱量

    則被冷媒帶走。

     

    除水器

    經過蒸發器后被冷卻的氣體通過除水器時,冷凝液被析出在一

    個 大 的 收 集 腔 里.模 塊 式 一 體 成 型 及 內 部 的 流 線 型 設 計 使 除 水器的壓降很低。

     

     

    2. Ultra compact heat exchanger

    The main part of the refrigeration air dryers is the heat exchan-ger.This compact aluminium unit contains various stages ofthe treatment of compressed air.

     

    Air/air exchanger. Where the first phase is carried out.

    In this section the inlet air is pre-cooled and the outlet air is

    post- heated.This allows the reduction of energy consumption

    of the chiller circuit and reduces the possibility of condensate

    forming on the outer surface of the outlet pipe.

     

     

     

    Flow mixing chamber. Unlike other exchangers on the

    market, the unit designed has a low mixing chamber at

    the air/air exchanger outlet.This passage is very important

    because the air temperatures at the exit of the air/air exchan-

    ger channels are not uniform.The mixing chamber enables the

    air low to enter the evaporator channels at a uniform tempe-

    rature, allowing an optimum exchange.

     

     

     

    Evaporator. The pre-cooled air in the air/air heat exchanger

    is mixed in the inlet mixing chamber of the evaporator and

    cools to the dewpoint. The heat is transferred to the gas

    refrigerant that evaporates. 

     

     

     

     

    Demister. The air cooled in the evaporator passes through a

    demister separator which allows the condensate to drain into

    a large collecting chamber.The geometry of both the module

    and demister allows pressure drop values to be kept low.

     

     

     
     

    1、壓縮機

    2、冷凝器

    3、風扇馬達

    4、氣-氣熱交換器

    5、蒸發器

    6、排污閥

    7、毛細管

    8、干燥過濾器

    9、除水器

    10、超級組合式熱交換器

    11、旁通閥

    圖4

    essicatore aperto / open dryer

    1. Controller

    2. fan motor pressure switch

    3. Fan motor

    4. Heat exchanger

    5. Condenser

    6. Coil brain

    7. Solenoid valve

    8. Valve strain

    9. Compressor

    10. Hot gas by-pass valve

    1、控制器

    2、風扇馬達壓力開關

    3、風扇馬達

    4、熱交換器

    5、冷凝器

    6、毛細管

    7、螺旋管閥

    8、排污閥

    9、壓縮機

    10、熱氣旁通閥

     

     

     

    Thanks to the DAT series, ATS w ants to put a high-eficiencymachine on the market, with the aim of energy saving and highreliability.The new innovative electronic management,studied

    by our technical department, allows to control and manageall functions of the machine, from the simplest to the mostcomplex ones, such as hard alarms (high and low temperature)

    Main features are:

    reduced energy consumption thanks to a careful selection of

    components and management by electronic board

    low pressure drop in its category thanks to the heat

    exchanger made of aluminum with a mixing chamber (ATS

    patent) that allows the air mixing increasing the exchanger

    yield and reducing the pressure drop at minimum

    dew point maintained stable at 3°Cin any situation of use

    thanks to the work carried out simultaneously by both the

    electronic board and heat exchanger with high eficiency

    - application scope of Gold series ranges from small business

    to large industry

    -DAT dryers are equipped with electronic drain or

    programable timer for all your needs

    - any other type of intelligent drain upon request

    -the only one dryer on the market with a thermal protection

    switch on every model

     

     Data refer to the following nominal conditions:

      -Ambient temperature: 35°C

      -Inlet air pressure: 7 barg

      -Inlet air temperature: 45°C

      -Dew point: 3°C (-22°C atmospheric pressure

    dew point)

     

    Max working condition:

      -Ambient temperature: 50 ℃

      -Inlet air pressure:70 ℃

     

     
     
     
     

     Standard reference conditions :

      -Ambient temperature: 35 ℃

      -Inlet air pressure: 7 barg

      -Inlet water temperature: 32℃

      -water pressure:Min.2 bar

    極限工作條件:

      -環境溫度:50℃

      -進氣溫度:70℃

      -入口水溫:35℃

      -水壓:10bar

    Max working condition:

      -Ambient temperature: 50 ℃

      -Inlet air pressure:70 ℃

      -Inlet water temperature: 35℃

      -water pressure:10 bar

     

    Up to 90% energy savings with the new DPL (dryer

    platinum) range

    Over 35% of a dryer ’s life cycle cost is the energy it consumes.To cut energy costs,we offer compressed air dryers with DPLrefrigeration with variable speed working cycle (Inverter). TheDPL range entails significant savings, reducing the consumptionof energy that produces fuels and protecting the environmentfor future generations.

     

    HOW does it work

    Companies have a fluctuating demand for air, which is why wehave been pioneers of inverter technology coupled with a dryer, to ensure that your processes receive the required air at therequired time.This ensures that the dryer is not using more energy thannecessary, effectively reducing energy consumption to over 90%. 

    主要性能

    - 所有基本參數都有顯示。

    - 變速壓縮機容量調節范圍可以從20%到110%。

    - 如果負載(用氣流量)低于20%時壓縮機會自動關停。

    - 可變速風扇。

    - 觸摸控制面板

    Main features are:

     - All Features already present on the DGO series

    - Variable speed compressor from 20% to 110% of the capacity.

    - Energy accumulation function with compressor OFF with loadlower than 20%.

    - Variable speed fan.

    - Touch screen control panel.

    標準工作條件參照ISO7813

     

      -環境溫度25℃

      -進氣壓力7BAR

      -相對濕度35%

      -露點:等級4(ISO8573-1)

     

    最大工作條件:

     

    參照DATA SHEET

    各機型可能會有不同,請參考廠家

    提供的具體技術參數表。

     

     

     

     

     

                 標準配件包含零氣損排水閥.

     

     

    Standard reference conditions ISO 7183:

     

      -ambient temperature :25℃

      -inlet air pressione : 7 bar

      -relative humidity: 35%

      -dew point:Classe 4 (ISO 8573 – 1)

      

     

     

    Max. working condition: 

     

    Please refer to datasheet

    Different model have different date sheet .

    pls refer to data sheet of ATS dryer.

     

     

     

     

     

        Included: No Loss Drain

     

     
    暫未實現,敬請期待
    暫未實現,敬請期待
    上一篇
    下一篇
    97色欧美视频在线观看,97色人阁俺也去人人人人人人,97色视频线观看在线播放_主页